Voron Zero 0.1 Led Strip Clip for 1515 Extrusion.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WS2818 LED Clip for the 1515 Extrusion found on the Voron Zero 0.1 Kit by Formbot.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 1364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a LED Clip for the 1515 Extrusion found on the Voron Zero 0.1 Kit by Formbot.
Although it is designed for the WS2818 5V RGB Led Strip it should fit something 10mm wide and 2mm deep.
If n is the number of LEDs you are having per side you need to print n-1 LedMounts and 1 LedMountEnd per side.
A small length of PTFE tube will slide into the cable channel to hold everything together. There should also be room within the PTFE tube to slide the return data cable that can be looped across to the other side/end.
Credits: This is a variation on the Jon's LED Clip found in the Voron Mods Github which I found didn't hold in the extrusion and would drop out. This version is also smaller and includes an end piece.