Honda Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This logo was created with Hondafont, this is an exact replica of the Honda logo
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 501
- Wydruki
- 2
- Wyświetlenia
- 1516
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Exact replica of a Honda logo. This was created with the Hondafont.
While printing I had some problems with warping of the protrusions of the letters, I solved this by reducing the print speed to 50mm/s.
I had good results with EcoPla Red.
I added a stand for the logo. Two different files, so you can switch color easily.
A little bit of glue is recommended if you want to put the logo on the stand.
EDIT: redid the chamfer of the stand.
Print Settings
Printer Brand: Elegoo
Printer: Neptune 3
Rafts: No
Supports: No
Layer height: 0.2
Infill: 20
Print Speed: 50mm/s
Print Time: 2h 27minutes