Universal and configurable box for Wemos mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box with lid for a small circuit board for the Wemos D1 mini with an adjacent grid circuit board for extensions
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 72
- Wydruki
- 2
- Wyświetlenia
- 541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I have built a lot of small systems based on Wemos D1 mini for measuring temperature, humidity, CO2, particulate matter, PIR and a lot more.
I don’t want to make a specific circuit board and a box for each one. So I have made a generic circuit board and this configurable box. If you don’t want to use this generic circuit board you can also use a grid board. The OpenSCAD file is included, but I can't include a Fritzing file in printables. If someones knows how to include a Fritzing file let me know.
Otherwise if you send me a shot message with your email address I will send the Fritzing file to you.
You can configure the size of the box, a hole for a USB power supply, holes cable entries or sockets.
The lid is connected to the box with a small “snap”.
The photo shows an example with a Wemos D1 mini and a DHT22 sensor for measuring temperature and humidity.