Mount for Disposable Cups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to have your disposable cups hanging on your bathroom wall. Or simply next to your sink.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
I needed something to hold my disposable cups in the bathroom while freeing up sink space. What better place than the bathroom wall? But you can also have this sitting next to the sink as well. =)
Cup diameter dimensions are 2" top and 1.5" bottom. These are the cups that I use. But feel free to play with the XY scaling in your slicer to get the right fit. Cut model to fit your need/capacity of cups. I recommend printing out the test model first to see if your brand of cups fit, and adjusting the XY scaling after.
If you decided to hang this up on the wall:
Buy these 3M double-sided adhesives and attach 2 of them to the mount. Print the mount on the long side using a textured bed because a textured surface increases sliding friction.
If you decided to place these next to the sink (i.e. not hanging on a wall):
Print the mount with the base touching the bed. This way the mount will be as even with the surface you’re putting it on.
Print Settings (same for either orientation)
Material: Any rigid plastic
Layer Height: 0.3 mm
Perimeters: 2
Infill: 20%