RC1 face shield compatible with US 3 Hole Punch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print allows the assemble to use a small build plate size and a 3 hole punch to produce face shields quicker.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Public Domain
This print allows the assemble to use a small build plate size and a 3 hole punch to produce face shields quicker.
A West Warwick High School Senior, as part of his distance learning, modified the existing STEP files for both the top and bottoms pieces so meet this need.
As a result not only does the headband portion assemble quicker, but it was also found that his 5mm extension of the bottom reinforcement, while it can use the holes, does not require them for a friction fit.
Print instructions
The current models were printing using .38 layer height to increase production volume.
I will include the STEP files as well once I recieve.