Zaros Godsword - 5' 8" scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lot of work went into this one, but here it is. This is a nearly 1:1 scale Zaros Godsword from RuneScape. The…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A lot of work went into this one, but here it is. This is a nearly 1:1 scale Zaros Godsword from RuneScape. The assembled model measures a total length of 5 feet 8 inches and is split into 9 parts. Because the blade and the "core" are different colors, I've separated them as their own models so that the pieces may be printed in the desired colors before assembly. I have printed this model (see the picture above) and it is a very big, but surprisingly light sword; the blade's balance is slightly out in front of the "black hole" portion.
This model was pulled directly from the game and heavily edited to be a printable object for cosplay purposes. Please enjoy responsibly.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
varies; low infill recommended.
Filament: Any PLA Any
Notes:
This model should fit together pretty well if your printer is correctly calibrated, and I find it really doesn't need anything stronger than hot glue to bond very securely together. A word of warning though, due to the nature of the model the blade's thin tip can be a little floppy if you swing it, so use caution to avoid snapping it.
This sword is BIG, and it's scaled to approximately the size it is in-game, give or take a couple inches. Expect to use a couple rolls of filament printing it.Category: 3D Printing