Altitude Control (Z Bearing Turner) for Hadley Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A more elegant ALTITUDE control of my telescope
- Ocena
- 4 / 5
- Polubienia
- 45
- Pobrania
- 250
- Wydruki
- 2
- Wyświetlenia
- 1750
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is a replacement for the left z-bearing for a Hadley Telescope with a geared edge that interfaces with a control wheel for one-handed predictable control of the telescope in the “up-down” direction. (I'm new to telescopes. I assume there's a more official name than “up-down”, but you know what I mean.)**UPDATE It's called “altitude”, people. ;-)
It works. I'm not sure it's a huge improvement in performance, but it is pretty satisfying. I just drilled a hole at the correct distance to get a nice tight gear mesh.
For a version with beveled holes and like the original see https://www.printables.com/model/331700-geared-z-bearing-remix-remix/comments by EggOkay.