1 / 5
Hanging Holder for Isopropyl Alcohol on DDD Wall Control System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to hang my isopropyl alcohol on my WallControl Peg/Slot board. Made this remix to do that.
- Ocena
- 5 / 5
- Polubienia
- 114
- Pobrania
- 205
- Wydruki
- 4
- Wyświetlenia
- 1254
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 9)Remiksy (0)Kolekcje (230)Powiązane
Wanted to hang my isopropyl alcohol on my WallControl Peg/Slot board. Made this remix to do that.
Note: the part named “2x3 Spacer blank flush” is optional. I thought I would need it but it's not really necessary. You can still put it all together without that part and it works great. It's the part that would go in the back near the bottom. Check out the image showing the back to see what I'm referring to. If you skip that piece you only need 10 4x10x8mm Pins rather than 14.