Inside Threaded Utility Survival Capsule / Container / Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inside Threaded Utility Survival Capsule / Container / Tube in multiple sizes
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 250
- Wydruki
- 1
- Wyświetlenia
- 1067
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
FULL CREDIT TO cncartist ON THINGIVERSE. UPLOADING TO SHARE WITH THIS COMMUNITY.
Summary
Here are a couple threaded containers for miscellaneous item sizes. The 2 parts thread together quite well and I have provided different widths/heights for different needs. The 145mm version is the largest one that fits on my Qidi Tech printer without exceeding the build area (as shown in Simplify3D).
For containers with pipe threading on the outside, check here - http://www.thingiverse.com/thing:1596643
Print Settings
Printer: QIDI Tech
Rafts: No
Supports: No
Resolution: 0.12
Infill: 30%
Notes:
No support/rafts required for tubes/caps, I used rafts and supports for the extension pieces. Printed in ABS with 3 shell layers, 7 top and bottom layers. My infill for these parts was 30% for Tube / 60% for Cap and layer height 0.12mm, feel free to change them to your desired amounts.