DS1302 DIY LED Clock housing for wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clock housing is designed for wall mounting od DIY DS1302 Clocks…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This clock housing is designed for wall mounting od DIY DS1302 Clocks (https://de.aliexpress.com/item/4000311133709.html). The USB Plug can not be used anymore, instead 2 wires need to be soldered to the appropriate power holes. There is enough space to put a 18650 LiIon inside the case as well.
It is designed to work with a resolution of 0.3mm, the first layer should be printed transparent, in order to see the LED circle. The rest can be printed in any color.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: Noname PLA Transparent/Violet
Notes:
It is designed to work with a resolution of 0.3mm, the first layer should be printed transparent, in order to see the LED circle. The rest can be printed in any color.
Category: Electronics