CR2032 Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This CR2032 Battery Holder is a safe way to store coin cell batteries.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 373
- Wydruki
- 5
- Wyświetlenia
- 1377
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This CR2032 Battery Holder is a safe way to store coin cell batteries.
The batteries snap into the holder but can be easily removed by pressing on the battery from the bottom of the holder to pop it out.
There is a version that holds 10 batteries, and a version that holds 5 batteries. If you prefer some other quantity you can edit the .scad file.
See the full guide for assembly and use instructions: CR2032 Battery Holder
Note: You should never dump a handful of coin cell batteries into a container or a pocket as they can short out when touching each other.
This file can be printed on a standard FFF (Fused Filament Fabrication) desktop printer without support.
Check out our other 3D Printed Parts as well.