Gaggiuino - Gaggia Classic | Pro Touchscreen Housing and Funnel Plate Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gaggia Classic, Pro/Eco/Evo touchscreen housing and mount for Gaggiuino
- Ocena
- 4,947 / 5
- Polubienia
- 251
- Pobrania
- 5648
- Wydruki
- 24
- Wyświetlenia
- 37 151
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised)
Fasteners (to attach touchscreen housing):
- 2 M4x10 button-head screws
- 2 M4 nuts
- Loctite 242/243 or equivalent
Recommended Print Settings:
PETG or PLA, 0.4 mm nozzle, 0.2 mm layers, 20% infill, no supports needed
Attaching the lid:
- Cut a piece of 1.75 mm filament with 5-10 mm extra length and use a heat gun to straighten if necessary
- Thread filament through the plate and lid holes and check that the lid rotates freely
- Melt one end of the filament to the plate with a soldering iron
- Cut the other end of the filament so there's about 1 mm extra sticking out of the plate to melt
- Melt other end of the filament to the plate with a soldering iron.
- File melted areas flush if necessary.
Quick Note:
This design is ready to jump off of a 3D printer and into your espresso machine (with a bit of help from you). If this is your first exposure to Printables I'd like to encourage you to make an account, like & download the Gaggiuino models to increase the project's visibility, and check out the great Printables community!
Credit:
Credit to LikeableBump for the model designed for Gaggia Classic Pro (Gaggiuino - Arduino & Touchscreen Housing for Gaggia Classic & Classic Pro v2 by LikeableBump - Thingiverse). I wanted better fit, strength and printability as well as compatibility with the Gaggia Classic