DTM Vase Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick vase mode version of: https://www.prusaprinters.org/prints/27748-dtm-v30-a4-face-shield-ppe-for-…
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 141
- Wydruki
- 3
- Wyświetlenia
- 1460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
This is a quick vase mode version of:
https://www.prusaprinters.org/prints/27748-dtm-v30-a4-face-shield-ppe-for-covid-19-remix-of-p/files
It prints quicker (30min) and with less filament used (24g)
Version 2.1 - closes the top
Version 3.0 - improves pins adds indent for support and breath-ability.
Version 3.1 - improved side hooks and added curve to the end for comfort
+added 4 pin EU version
+added 6 pin US 3 hole punch version
Print instructions
I printed it in vase mode with .3mm layer height. I left the first layer speed the same but doubled everything else. Extrusion width was increased to 0.6mm (needs testing). I had to go to my filament setting under cooling and change the "Cooling Thresholds, Slow down if layer print time is bellow: " to 5 sec.