1 / 6
Apple AirTag Halterung für Foto Kamera / Apple AirTag mount for photo camera — zdjęcie 1
1 / 6

Apple AirTag Halterung für Foto Kamera / Apple AirTag mount for photo camera

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DE: Versteckte Anbringung eines AirTags an die Fotokamera EN: Hidden mounting of an AirTag to the photo camera

Ocena
0 / 5
Polubienia
27
Pobrania
148
Wydruki
0
Wyświetlenia
1403
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

(Please find English Text below)

 

DE:
Versteckte Anbringung eines Apple AirTags an die Fotokamera: 
Die Halterung wird einfach in das vorhandene Stativgewinde geschraubt. 
Optional kann ein kleiner Stift zur Arretierung verwendet werden.
Für eine dauerhafte Anbringung des Stifts kann dieser auch verklebt werden.

Deckel und Stift werden ohne Stützstrukturen gedruckt.
Das Gehäuse benötigt Stützstrukturen. 
Ich habe daher die GCODE-Dateien beigefügt. Diese wurden in PrusaSlicer für den Prusa MK3S mit 0,2mm PLA erstellt.
(Ich habe das Gehäuse so gedruckt, dass sich die Stützstukturen auf der Innenseite befinden. Dadurch ist die Oberfläche des später sichtbaren Bereiches sauber gedruckt. Die nicht so schönen Bereiche die mit Stützstrukturen versehen waren, bleiben verborgen hinter dem AirTag.)

Link zur verwendeten Schraube bei Amazon:
https://amzn.eu/eB6UQdj

 

EN:
Hidden mounting of an Apple AirTag to the photo camera: 
The mount is simply screwed into the existing tripod socket. 
Optionally, a small pin can be used for locking.
For a permanent attachment of the pin, it can also be glued.

The cover and pin are printed without support structures.
The housing needs support structures. 
I have therefore attached the GCODE files. These were created in PrusaSlicer for the Prusa MK3S with 0.2mm PLA.
(I printed the housing so that the support structures are on the inside. This way the surface of the later visible area is printed cleanly. The not so nice areas that had support structures remain hidden behind the AirTag).

Link to the used screw at Amazon:
https://amzn.eu/eB6UQdj

Tagi