1 / 4
Vivitar VPT-360 Quick Release plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a quick release head for a tripod I picked up at a thrift store, a Vivitar VPT-360, long since discontinued and parts are no longer available. It took about six iterations to get it right and I could still tweak the back edge if I wanted to get it perfect, but it works and works well.
Print Settings
Printer:
FLSun 3D Cube
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2mm
Infill:
30%
Filament:
Inland PLA
Gray Post-Printing =============
It uses a 1/4" bolt to hold the camera. The alignment post is optional, and should be 4mm wide. There's a hole in the plate to receive it.
Category: Parts