1 / 1
Faster Print, DtM-v3.1 Face Shield PPE for COVID-19 — zdjęcie 1

Faster Print, DtM-v3.1 Face Shield PPE for COVID-19

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S.

Ocena
5 / 5
Polubienia
4
Pobrania
223
Wydruki
3
Wyświetlenia
1126
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S.

I've updated this to drop the print time down to ~3h 40m for 2 on an MK3s. THIS IS A REDUCTION OF ~1h 20m!!!! for two shield holders. Please see attached files. The change was to reduce the visor thickness. The visor integrity is solid.

Updated per original creator to remove markings that could hinder cleaning.

I've produced about 60 of these so far and I am trying to produce another 100 over the next few days.

Print instructions

PrusaSlicer Draft Mode @ 30% infill, PLA or PETG

Tagi