Flying Bear P905 Part cooling Fan (Creality Fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the current design, It is still a work in progress. It should have no issues with clearance on the Y-axis bar…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is the current design, It is still a work in progress. It should have no issues with clearance on the Y-axis bar or the pulley that drives it. Mounted on the printer using hardware that came with the printer.
It is designed to work with the 40mm blower fan from Creality.
The fan can be locked in with two small pieces of filament through the mounting holes.
I used the Lined support material that allowed me to break it out of the cavity easily.
Feedback and revisions are always welcome!
Print Settings
Printer:
Flying Bear p905
Rafts:
No
Supports:
Yes
Resolution:
0.15 mm
Infill:
20%
Filament:
Hatchbox PLA
Black
Category: 3D Printer Parts