1 / 1
Sturdy little 10mm drill guide / stabile 10mm Bohrlehre
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a lot of 100% straight 10mm holes for austrian Blum hardware so i created this sturdy little drill guide.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 698
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
If you need to drill some perfectly straight holes with 10mm, try this little guide.
With helpful cut-outs for alignment. This little thing helped me a lot. Just clamp it down where you need it.
I used PETG, a 0.4mm nozzle and a high infill percentage.