Nestable face shield based on Prusa RC2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Think2Thing COVID-19 face shield design is based on the original PRUSA RC2 headband.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 1194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Think2Thing COVID-19 face shield design is based on the original PRUSA RC2 headband.
https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2
The design breaks up the PRUSA RC2 into sub components to allow for nesting of sub components to maximize the build volume for SLS machines (eg. EOS P395)
The sub components are assembled after printing to form the final product
Orignal Solidworks files, Magics, SLI, and assembly instructions can be found here:
https://www.dropbox.com/sh/g9fik5xau94kshb/AABDMkcXDLKx5x_n1VQdVc_0a?dl=0
Print instructions
One full set contains:
1 pc t2tcovidfaceshield-001_R[radius]
1 pc t2tcovidfaceshield-002_R[radius]
1 pc t2tcovidfaceshield-003
1 pc t2tcovidfaceshield-004
1 pc t2tcovidfaceshield-004_mirror
1 pc bottom_reinforcement
The [radius] for t2tcovidfaceshield-001 and t2tcovidfaceshield-002 is determined by your maximum print dimension. Use the radius-to-width look up table to find the STL that suits your printer.