ANYCUBIC M3 FEP FRAME
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement of the proprietary FEP frame Anycubic is trying to sell for their M3.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 268
- Wydruki
- 1
- Wyświetlenia
- 1154
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement to the proprietary FEP frame Anycubic is trying to sell for their M3.
Print two of the same .stl. The indents are mirrored so it fits into itself.
You install it similarly to the way the old frames worked using a bottle cap. Though this one doesn't have space for extra screws. Instead, there are divots that pinch the FEP between the two pieces. You then poke holes for the installation screws that go into the frame.
I have printed and tested three of these, and I haven't had a single problem.
The FEP size I used is 260mm x 200mm x 0.15mm. The exact one I used can be found here:
https://smile.amazon.com/dp/B07ZTS4H8K?ref=ppx_yo2ov_dt_b_product_details&th=1
If you have any problems, please let me know so I can correct it.