Disc Shooter Mk4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printed no extra parts or glue required
- Ocena
- 4,806 / 5
- Polubienia
- 659
- Pobrania
- 2252
- Wydruki
- 45
- Wyświetlenia
- 15 651
- Oceny
- 36
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Semi automatic disc shooter - fully 3D printed - no extra parts or glue required.
Done as an engineering challenge and to show what can be done with 100% printed things, its also a lot of fun. Last part of a series of shooting things.
Settings:
All done with 0.2mm layer and grid infill.
Plate1: 20% Infill - Support on build plate only, No brim - No raft
Plate2: 20% Infill - No supports - No brim - No raft
Plate3: 40% Infill - Supports everywhere - Brim - No raft
Plat4: 40% Infill - No supports - No brim - No raft
DSDiscPlate: 20% Infill - No supports - No brim - No raft
Note: If you have issues with the bolts fitting (all printers are different) you can resize Plate4 in your slicer and that should help.
This model is a development from my Mk3 disc shooter, but basically a new model as every single part (including screws) were all re-designed, so I didnt flag it as a remix (let me know if I should do).