LMN 3 - DIY Synthesizer case files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LMN 3 Synthesizer DAW inspired by the OP-1 See: https://github.com/FundamentalFrequency
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 1480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Note: just publishing the STL files (this is not my work). Full credits to the designers and creative minds behind this project.
Feel free to join the Discord server and discuss/share your thoughts and builds.
I found these on Thingiverse: https://www.thingiverse.com/thing:5426597I
I added them to republish them, the 2 part version needs support for the overlapping border. PLA would be fine as material.
Thanks for the split files KastenFrosch!
3-D Printing
You can also 3-D print all the layers using the STL files provided in the releases. However, depending on the size of your print bed you may need to post-process the files a bit in order to fit them on your printer bed. You can cut them in half (maybe use a stair-step-shaped cut to provide some surface area for gluing) and then print parts in 2 pieces. Post-processed STL files are not provided, as everyone's printer is different, and it would be too much work to provide enough sizes to keep everyone happy. Feel free to modify the FreeCAD part files yourself and re-export modified STLs, or manipulate the released STL meshes.
If you would like to process the parts using FreeCAD, you may find this video helpful.
note: I will redesign and publish the files so they will fit on smaller printer build plates
please be patient with my journey in 3D design ;)
The LMN-3 is an open source DAW-in-a-box. The project is composed of the following repositories:
Here is an overview video of the project. If you would like to discuss the project, please use the dicussions tab. There is also a Discord server for the community; invite here.
LMN-3-Build-Guide
The build guide explains everything concerning the configuration and assembly of the LMN-3. It will guide you through the process of flashing the firmware, soldering the PCB, assembling the case, and configuring the Raspberry Pi for use with the LMN-3 DAW.
LMN-3-DAW
The LMN-3 DAW is the heart of the LMN-3 project. It is the software that contains the core functionality of the LMN-3 and provides DAW capabilties such as recording, editing, and mixing. It is powered by an open-source audio engine called the Tracktion Engine. It runs on a Raspberry Pi.
LMN-3-MCAD
The LMN-3-MCAD repository contains the FreeCAD project files for the LMN-3 enclosure. The releases contained in this repostory contain files that can be used to lasercut (or 3-D print) the enclosure for the LMN-3.
LMN-3-ECAD
The LMN-3-ECAD repository contains the KiCad project files for the LMN-3 PCB. The releases contained in this repository contain gerber files that can be sent to a board house for manufacturing of the PCB.
LMN-3-Firmware
The LMN-3-Firmware is the software that runs on the Teensy microcontroller that is soldered to the PCB. All the switches and encoders are connected to the Teensy, which communicates with the Raspberry Pi running the LMN-3-DAW via MIDI.
LMN-3-Emulator
The LMN-3-Emulator emulates the physical LMN-3 hardware. It is software that sends the same MIDI information that the hardware sends, and is controllable via a graphical user interface. It can be very useful for developers wanting to test out the DAW without needing a physical LMN-3 device.
LMN-3-Keycaps
The LMN-3-Keycaps repository contains OpenSCAD files for creating the keycap models used in the FreeCAD assembly found in the LMN-3-MCAD repository. It also contains keycap icons that can be printed and attached to the keys themselves.