Modular Pegboard Toolracks (US Spacing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of modular tool racks designed to hold most common hand tools. Spaced for particle pegboard; 1 in between centers.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 1562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A group of modular tool racks, designed for a particle pegboard with holes, 1 inch center-to-center. Each model shares the same size footprint, and is specially designed for, but not limited to, the following tools: Pliers, Screwdrivers, Files/Cables, Blades.
Due to the thin particle board, zip ties were the chosen method of attachment. Two zip ties hold each tool rack to the pegboard. As each workshop is individual, I have uploaded the surface models (STP file format), so you can customize the holes for your own hardware setup as needed, or print as-is.
I have also designed/printed/installed a version of these on a European metal pegboard in my workshop as well (metal pegboard 6 mm holes, 15 mm center-to-center). The design uses M6 metric bolts to screw into the surface, if you are interested please see the designs here: www.printables.com/model/281039
Files and Hardware:
All files are surface models (STEP), as you will likely want to customer the hole size for your individual pegboard. I designed this with my Prusa MK3+ in mind, but this should be easy to print on any FDM printer with standard settings. All parts are optimally sized to fit on the MK3+ build plate.
Printing:
All parts print great with the standard Prusa Slicer “0.20 mm QUALITY” profile settings and no supports!
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Supports: None
Perimeters: 3
Infill: 20%