1 / 1
Prusa Face Shield Stacked 3.2 remix - 8 piece 10hrs - no bottom - PETG — zdjęcie 1

Prusa Face Shield Stacked 3.2 remix - 8 piece 10hrs - no bottom - PETG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

We are not using the bottom reinforcements.

Ocena
5 / 5
Polubienia
0
Pobrania
145
Wydruki
0
Wyświetlenia
1387
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

We are not using the bottom reinforcements. This Gcode starts with the Prusa provided Gcode for the Protective Face Shield 3.2, with the bottom reinforcements removed. Version 3.2 is stronger, no further changes are needed.

See the original 3.1 details for more information. (Make sure you're well tuned!)

Print instructions

  • Use PETG
    • Ensure you're MK3/S is well maintained
    • Read all original 3.1 provided instructions