Gridfinity Parametric Divider Bin Fusion360 File
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
F3D file that is fully parametric for size, dividers and labels
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 1039
- Wydruki
- 2
- Wyświetlenia
- 4334
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here:
https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba
More info on Gridfinity can be found here:
I was having problems with Zack's file creating different sized and sliced models on the fly. Reworked his model a bit to make not only the length, width and height parametric, but also the dividers and whether or not it has a label at the top or not. I did remove the sweep on the inside (was not needed for my use) and the screw holes.
Enjoy!