Loc-Line Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt a Loc-Line hose with a spring clamp to a action camera mount. Super handy
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 1528
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Take a Loc-Line hose and a spring clamp (most might have them already in their shop. Add these two little bits and you have a camera mount that is freaking amazing.
The Adapter (rectangular printable) is attached to the clamp via epoxy or by 4 m3 screws. You will need to drill and tap the spring clamp. Then the Loc-Line just screws into the mount.
The roundlar bit is stuffed inside of the end point of the loc-line with a ¼-20 bolt that screws into your camera directly or on to a cold shoe mount of your choice. Let me know if you make one!
Clamps: https://amzn.to/3dvnnBz
Loc-Line: https://amzn.to/3dAynNP