1 / 1
Prusa Protective Face Shield - RC1 4x on Prusa I3 MK3S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows 4 RC1 shields to be printed at once, but without the bottom reinforcement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 918
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This allows 4 RC1 shields to be printed at once, but without the bottom reinforcement.
This also includes a 0.6mm nozzle gcode file that has been highly optimized for the Prusa i3 MK3S and prints these four shields in 3h18m
Print instructions
Recommended settings for a quality print are set up for 0.25mm layer height of PETG, 3 perimeters and 30% infill.