1 / 3
Gameboy DMG Cartridge Shell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement shell for a Gameboy DMG/Color cartridge.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1016
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (10)Powiązane
Replacement shell for Gameboy DMG and black Gameboy Color cartridges. I've done my best to replicate all external details and if needed you can use either printed part with an OEM part of the opposite half. This can fit both small boards and large boards with the save battery. All test fits were done with both a modded and unmodded DMG and a “Legend of Zelda: Links Awakening” board.
Notes For Printing:
- The included Gcode and .3mf files are what I used on my MK3S+ to print the cartridge shown in the images but obviously if you think you can get more detail just modify the .3mf or use the .stl.
- If you're adamant about not using any supports you can technically print the front part face down but from my testing the details on the front will be far far worse then if you use the small amount of supports to print it face up.
- If you're having trouble with the two halves not quite fitting right you might need to trim the screw hole on the front half a little bit.