SpeedSource CG 7in
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7in Street League Open Source Frame
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is in prototype phase, I designed it in a few hours for the upcoming championships, I will update the frame and have it for sale next season on SpeedSourcefpv.com.
The frame is meant to maximize on CG and aero, braces are included but technically optional to meet the SL rules. I have not tested without braces yet so I am not sure how they hold up. (the arms are only 6mm wide by 8mm deep - stacked)
You can run this frame with the battery on top or on the bottom, you can also run the esc in the middle between the two main plates. I will be releasing more files for various configurations.
More detail to come..
Hardware:
m3x20mm screws
m3x30mm countersunk screws
m3 nyloc nuts
m3x8mm nylon hex standoff (to hold the front canopy)
m3x10 standoffs (you can change the height depending on your build, 10mm is if you run the esc in the center of the frame)