2kg wall mount spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very fast to print & strong 2kg spool holder with visible honeycomb infill.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 549
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This wall mount spool holder prints in less than 1h and is actually stronger than many other designs.
I have tested it to hold 10kg at the tip without any sign of weakness, so don´t be afraid by it´s light design !
It's not designed to support cross loads so I recommend to use it mainly above the printer, otherwise it may wiggle during unwinding.
Can be used for 1 and 2 kg spools.
To be mounted wit a single 4mm wood screw (no need to tighten too much).
Printing tips:
(please have a look at the provided files)
0.3mm thickness, 3 perimeters, 0.6mm extrusion width, no top/bottom layer, no supports, 15% honeycomb infill.