JBC C245 Tip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports. Holds 10 C245 style tips. In my…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports.
Holds 10 C245 style tips.
In my design I wanted to add some weight near the base to make the holder more stable so using CURA's 'Pause at Height' feature, pause at layer 26 and insert 10 x 5/32" or 4mm steel ball bearings in to the printed holes making sure to push them all the way in, should be around less than a millimeter protruding when resuming print.
These steel balls also have the added advantage of stopping the sharp end of the tips digging in to the plastic, just don't push them in with too much force, not needed and may damage the point.
Happy Printing ;)
Category: Electronics