Aixun T3A Solder Station Sponge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports. I recently got an Aixun T3A…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports.
I recently got an Aixun T3A solder station but decided on a different stand & the new stand did not have a place for a tip sponge so I designed this model to hold the original metal dish & sponge from the stand that came with the station.
Taking dimensions from the dish that came with my unit, my design has just enough tolerance that it holds the dish in place quite nicely without any adhesive, your mileage may vary but if it is loose perhaps a dab of epoxy will hold it.
Happy Printing ;)
Category: Electronics