Right Hand Slimcase Extrusion Standoff - Xtra Fixings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slight remix of: https://www.thingiverse.com/thing:4221768 This is firstly a mirrored part to mount the screen on…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A slight remix of: https://www.thingiverse.com/thing:4221768
This is firstly a mirrored part to mount the screen on the right hand side.
Having done this for my own purposes I found that the bracket was a little insecure with just the single fixing point on each face so I added a second.
I kept the model as original without needing supports to print.
0.2mm LH.
Have included the FreeCAD file, (excuse the mess, I am no professional), incase anyone wishes to alter this model.
Print Settings
Printer:
Anycubic MZ2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
75
Filament:
Sunlu PLA
Blue
Category: 3D Printer Parts