LDR Sensor Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A recent project I was making required an LDR and it was very cheap to purchase a bulk load already on small boards…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 285
- Wydruki
- 1
- Wyświetlenia
- 1056
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A recent project I was making required an LDR and it was very cheap to purchase a bulk load already on small boards that use the LM393 & output Analog & Digital signals, from Ali Express:
https://www.aliexpress.com/item/1959461876.html
I designed a small enclosure in FreeCAD to house the sensor.
There is also access in the base to the sensitivity adjuster.
Secured with a No.4 x 1/4" self tapper.
No fancy filament, just cheap SUNLU PLA from AliExpress.
The dropdown box does not have my exact printer but it is:
Anycubic Mega Zero 2
Hotend @ 190°C
Bed @ 60°C
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
25%
Filament: SUNLU PLA Black
Category: Electronics