B&T APC9 Pro Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for a Brügger and Thomet APC9 Pro
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1015
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This stand is made to work with the stock B&T magazines, also works with the aftermarket ones KCI makes.
The first version I made has the B&T logo cut in to the base
The second version uses a separate disc with the logo so you can use the stand facing either way
WARNING: When I print this on my Prusa MK3S+ the magazines are a tight fit and when I put them in and pull them out they do not seem to be scratching the magazines at all. If you want to print this but do not want a tight fit just increase the size slightly in your whatever slicer program you use.
These were printed with Prusament PETG but you could use PLA
Print settings I use:
PETG
.2mm
15% infill
No supports needed