1 / 4
Tired of scratches in the print bed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of scratches in the print bed, this solves the problem, this works very well to remove the print from the print…
- Ocena
- 4,667 / 5
- Polubienia
- 78
- Pobrania
- 816
- Wydruki
- 14
- Wyświetlenia
- 4604
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 14) (Komentarze: 19)Remiksy (3)Kolekcje (227)Powiązane
Tired of scratches in the print bed, this solves the problem, this works very well to remove the print from the print bed. It is made of PETG so if you want to use the G code you are welcome.
Have used this on many prints and it works great.
Print instructions
optional settings!
Layer hight= 0,2
Perimeters= 5
Infill= 15 or 20%