1 / 3
Muldenkipper / Field railway wagon - DIN5963 - NO BRAKES - for 45 mm track - 1:16
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper without brakes, according to DIN5963
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 291
- Wydruki
- 0
- Wyświetlenia
- 1258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper without brakes according to DIN5963.
Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm)
The bearing holders are fixed to the frame with M2 screws. On the side of the tip M3 screws are fitted (4x).
To block the rotation of the bucket you can fit a 2 mm pin in the hinge, or slide some 1.5 mm metal wire running over the M3 screws in the side of the bucket.