12864 Full Graphic Smart Controller minimalist mounting bracket for Anet A8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to hold the commonly available 12864 Full Graphic Smart Controller to
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted a simple mount to hold the LCD display that came with all 3 of my RAMPS 1.4 kits for all 3 of my Anet A8 printers. I couldn't really find anything that wasn't like an entire electronics enclosure, so I made this. It's really simple, I just measured the distances on the mounting holes for the original display and made a clamp to hold the newer display. It sits in a small groove on the bottom and is held by 3 m3 screws along the top edge.
The reason I went with a “clamp” style is because the holes are REALLY close to the edge and I didn't trust them to support the weight of the unit, especially when operating the knob. This also keeps the SD card slot accessible.
I printed mine using tree supports and they separated easily.