Print in place photo filter case 77mm - easy print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a 77mm photo filter. I used PETG, but PLA works also.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 431
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case that I designed in order to accomodate a circular polarizer 77mm photo filter. It has an interior height of 12mm and the filter fits snuggly, without any foam or cloth.
The case has a simple locking machanism that keeps it closed while not in use.
It is a simple print-in-place single file object. One can add decals or even write with a sharpie on the top of the case, what kind of filter there is.
If you need, I can provide the case with the tops having a slit in order to see the top of the filter (not the rim) without opening the case. I preferred the all closed type in order not to have something entering the slits and scraching the filter.
After printing, specially with PETG, the hinge needs a bit of opening and closing in order to clean the printing imperfections. After a few moves, it gives in and starts to close smoothly.