Space saving measurement tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang your combination hook, carpenters square, measure and angled rip in one small piece on the wall
- Ocena
- 3 / 5
- Polubienia
- 25
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 841
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
In order to save space on my tool wall and to prevent these precise measurement tools for ending below a pile of other stuff, I've designed this minimal hook. On the side you can hang your combination square, an add-on that was inspired by a design on thingiverse that seems to be removed? Can't find it…
I've used the screw holes to attach a simple french cleat, but you could screw onto your board or add pegboard supports if you like.
Currently it used these width for the three slots;
- Angled rip / square: 2mm
- Carpenters square: 2mm
- Measurement tool: .3mm
all these have a .5mm clearance on both sides.