manual stable turn table for 3d scanning
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
manual turn table for 3d scanning of small objects, needs one 608 bearing for smooth turning. anti slip foot
- Ocena
- 4,875 / 5
- Polubienia
- 229
- Pobrania
- 914
- Wydruki
- 17
- Wyświetlenia
- 6321
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
from lack of a turn table with right proportions for 3d scanning i tried most of the designs but did not find them adequate for my needs.
i wanted
- smooth movement
- right height for turning by hand
- stable
- not slipping on table
first, i designed the lower part (stand) to hold the 608 bearing and make primarily contact with the inner part of the bearing. then the upper part (table) i made to fit the 608 bearing snuggly but have 4 holes that the bearing can be removed with a small screw driver and the main contact of the bearing is on the outer ring. the upper and lower parts i made to have both a ring of plastic at small gap so that if a heavy object is put on the table, the load is held plastic on plastic and the bearing is not strained but helped. it results in a free turning quite stable turn table. finally, i realised the contact to the table needs more grip, so i added a fitting rubber foot, that makes the turn table hold on a table when turned. this foot needs to be printed in flexible material to work.
i printed stand and table in PLA and the foot in ninjaflex.