Dolly 360 Timelapse for Ender 3 v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dolly system for Ender 3v2, it can be adapted for other 3D printers (hopefully)
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello🖐. This is my take on a dolly system to make 360º timelapses during time-lapses while printing.
The rail parts and the holder require thick walls for protection. I tested PLA and ABS prints and in the end, I preferred PLA for robustness.
The source code can be found here https://github.com/juandelacruz-calvo/360-octolapse-scripts
Simply clone the repository inside octopi and point the scripts to the folder in which you have cloned it.
The bill of materials is:
- Raspberry PI, any model compatible with Octolapse
- Texas Instrument DRV8825 https://amzn.to/3fw3vzf
- Stepper Motor NEMA 17 https://amzn.to/3U61RTR
- 12V Power supply for the Driver and stepper motor https://amzn.to/3Tdp597
- Microswitch, D2F Ultra Subminiature Basic Switch with roller https://docs.rs-online.com/be7e/A700000008799386.pdf
- 1 Webcam, specially designed for Logitech but it can be adapted
- 3 x 45mm M3 Countersunk screws
- 1 x 20mm M3 Countersunk screw for the rail notch
- 6 x 20mm M4 Countersunk screws
- 2 x 35mm M5 Button head screws
- Enough nuts for each of the screws :)
- 2 x 608 Bearings
You can find some details about it here: