Big Vase mode Silica / dessicant container (for car)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to try and dry my car with silica gel (against foggy windows), so I designed this fast vase mode container
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 314
- Wydruki
- 3
- Wyświetlenia
- 1798
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I liked animatorgeeks take on the vase mode dessicant container. I also wanted to try and dry the air inside my car with silica gel, to avoid fogged up windows when driving in the cold mornings.
I therefore modeled this thing from scratch in much larger size, and with a different thread on the top. This version uses a round bottle thread which is much more suitable for 3D-printing in my opinion.
The diameter is 75mm, height is 90mm. I guess it fits around 250gr of silica (didn´t measure it).
I printed them with a 0,6mm nozzle at 0,8mm layer width, most parts except maybe the thread can be printed at 0,4mm layer height. This way both parts together (see .3mf-file for sequential printing example) take 2h15min and around 33gr of filament. Works well in PETG.
Since it has to dry a whole car I used two of these containers, up until now they seem to work well. I will probably have to dry the dessicant every few weeks.