Quick and Simple Filament Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A crude first attempt at making a filament holder
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is a re-upload from my Thingiverse page now that I'm locked out of it. Originally published January 25, 2016 to https://www.thingiverse.com/thing:1291997
Summary
Hey Guys! I've uploaded two variants on the same thing. The flat version is for printing on its side if your printer doesn't have 135mm of Z Axis, or you don't like tall prints. The other, balanced version is recommended if you print it, as it will be more stable.
Once you've got it all printed, just stick any rod through it, and put on some filament.
Print Settings
Printer brand:
RepRap
Printer:
Prusa i3
Rafts:
No
Supports:
Yes
Resolution:
Any, I used .3, as it doesn't need to be pretty
Infill:
Some, enough that it'll hold a spool