Raspberry Pi and 2-Channel-Relay Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 4 & 2 Channel Relay Module Case
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Raspberry Pi 4 & 2 Channel Relay Module Case
This snug enclosure is designed to host a 2 channel relay and a Raspberry Pi 4. It is assembled with only two head socket screws. There is room for short jumper cables (female-female) and the DC cables running IN and OUT (1 and 2). The Raspberry Pi is powered by USB (Pi). It is recommended to zip tie the cables on the inside for strain relief. The camera ribbon exits through the ventilation slots.
This combination of Pi and relay is intended to be used with Octoprint and two lights (main and fill light). I use the enclosure plugin to control the Pi's GPIOs.
Parts list:
- Raspberry Pi 4
- 2 channel relay module
- Hex nut 2x M2.5 mm
- Socket head cap screw 2x M2.5x25 mm
- Wood screw 6x ø2 mm
Print instructions:
- Filament PETG
- Layer height 0.3 mm
- No supports
Raspberry PI:
https://www.raspberrypi.com
Octoprint:
https://octoprint.org
Enclosure plugin:
https://github.com/vitormhenrique/OctoPrint-Enclosure