M6 nut and bolt (M10 head) for Face Shield RC2 holde remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M6 nut and bolt (M10 head) for Face Shield RC2 holded remix. Easier to fit and remove than rivet.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
M6 nut and bolt (M10 head) for Face Shield RC2 holded remix. Easier to fit and remove than rivet. Both threads slightly relaxed and for me fitted and threaded correctly first time. As usual with threads I suggest a minimum of 3 perimeters.
Print instructions
I printed 0.4 nozzle 0.15 layer height. Nut with flat curve down standard supports (not ideal but easy) with .2 support distance. Bolt Head down, thread up. I have only printed PETG so far. Printing the Nut edge on may need a brim and may print unuseable thread.