1 / 3
Woo Young Woo Ratcheting Mini Driver (print-in-place)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right-side-up or upside-down, it prints the same way!
- Ocena
- 4,833 / 5
- Polubienia
- 135
- Pobrania
- 501
- Wydruki
- 7
- Wyświetlenia
- 2242
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 8)Remiksy (2)Kolekcje (176)Powiązane
This is a riff on FreddyZ's Print-in-Place Ratcheting Screwdriver. It is completely symmetrical – both ends are identical. To drive, shove your bit in one end. To reverse, shove your bit in the opposite end. The handle has storage for up to 6 additional bits. Designed for 4mm shank mini bits up to 32mm long.
Printed in PLA with 0.2mm layers and no supports. Both the internal ratchet/socket and the external housing print-in-place, and it operates immediately with virtually no “break-away” needed.