Big Crystal Ball Fisheye for Canon PowerShot ELPH180
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's fairly obvious that a crystal ball produces a fisheye view when you look into it... so why not have a camera look…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
It's fairly obvious that a crystal ball produces a fisheye view when you look into it... so why not have a camera look into it? That's what this thing does: mount a BIG crystal ball at an appropriate distance in front of a Canon PowerShot ELPH180 (or similar camera).
Clear crystal balls are very common on eBay. In an earlier design I made a mount for a 30mm diameter ball, but the image quality was very poor. So, perhaps a bigger ball will do better? This design uses an 80mm ball which cost $14. You can see how much larger this really is in the second and third photos; it's really quite hefty. Optical quality of the 80mm ball is fairly good, but there is still a problem with the PowerShot not having enough DoF to keep the entire sphere in focus. As you can see by the circular samples above, the resulting images are still of rather low quality. Still, this is cheap, interesting, and sort-of fun as a novelty. Enjoy!
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
No
Resolution:
0.25mm or finer
Infill:
around 25%
Filament: Rosewill PLA Gold
Notes:
Best to print the parts separately because you get cleaner threads. I used Gold PLA for the body just to make it look cool, but that meant I had to paint the inside with Black 2.0; using opaque Black PLA would avoid the need for painting. The mount fits the ball in the front, which is then locked in place using the lock part. The whole rig is then connected to the PowerShot by screwing-in the printed 1/4-20 bolt to the camera tripod socket.
A little postprocessing helps...
Although image quality is far better than with the 30mm ball, this 80mm ball has a huge level of transverse chromatic aberration (CA). In GIMP, the CA can be largely fixed by +30 Blue and -30 Red. That's actually beyond the maximum correction you can do in one pass, so you do it with three passes of +10 Blue, -10 Red. All the above images have been corrected. Here are crops from the last one without correction and with correction.

Crop from last image showing CA

Crop from last image after CA correction
Category: Camera