Raspberry pi zero camera octoprint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Design to uso double side tape to glue into your printer frame , the camera have 180 degress of rotation to allow you to set the better view for your set up.
Dont need any support ,desing with cable managment in mind featuring two cable ties guides built in.
To assemble it you will only need a few things:
M3 Set screw https://s.click.aliexpress.com/e/_DktyA3H
3M double side tape https://s.click.aliexpress.com/e/_DC0rsm7
Cable tie https://s.click.aliexpress.com/e/_Dk05TRh
Raspberry camera https://s.click.aliexpress.com/e/_DFXB3CT
Raspberry pi zero 2 https://s.click.aliexpress.com/e/_DEB3hlH
To assembly you will need.
4u. M3x20mm screws to screw to cover in place.
2u M3x16mm screw to secure the camera mount.