DoLessHarm Door handle without text
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've removed the English text. So you can add one in your own Language.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I've removed the English text. So you can add one in your own Language.
Print instructions
I've added an new version which uses a hose clamp to get a tighter grip on the door handle.
The part has already the right orientation for the printbed (laying on the side).
I print it with:
0.20 mm layer
PETG
10% infill = ok
Prusa MK2.5S
and with those settings it takes around 13,5 hours to print 14.
I've increased the PrintSpeed settings.
5% infill = brittle
15% infill = best
If you have a MK3 you can try the speed settings of the Prusa face mask. https://www.prusa3d.com/covid19/#_ga=2.120726536.1401592319.1585780645-1724646180.1584294269
This settings are to fast for a MK2.5S